LMI REPLACEMENT SYSTEMS
LMI REPLACEMENT SYSTEMS

Featured Products

{"id":387622704,"title":"050-160-060-005 PAT Hirschmann DS160 Console","handle":"ds160-console-pat-hirschmann","description":"\u003ch1\u003ePAT Hirschmann DS 160 Console\u003c\/h1\u003e\n\u003cul\u003e\n\u003cli\u003eNo re-calibration\u003c\/li\u003e\n\u003cli\u003eDisplays actual and allowable load, boom length,boom angle, and load radius\u003c\/li\u003e\n\u003cli\u003eUses existing boom components\u003c\/li\u003e\n\u003cli\u003eIntegrated bar graph provides a quick reference ofthe cranes utilization\u003c\/li\u003e\n\u003cli\u003eUser-friendly console and setup\u003c\/li\u003e\n\u003cli\u003eMeets SAE and ANSI B-30.5 standards\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eDS160 Console Operators \u0026amp; Service Manuals:\u003c\/h2\u003e\n\u003cp style=\"text-align: left;\"\u003e\u003ca href=\"http:\/\/www.bodetechnicalservices.com\/wp-content\/uploads\/PAT-Hirschmann-DS-160-Operators-Manual.pdf\" target=\"_blank\" title=\"DS160 Operators Manual\" rel=\"noopener noreferrer\"\u003e\u003cimg alt=\"\" src=\"\/\/cdn.shopify.com\/s\/files\/1\/0702\/9949\/files\/PAT-Hirschmann-DS-160-Operators-Manual-Thumbnail-791x1024_medium.jpg?v=1529951183\" style=\"float: none;\"\u003e\u003c\/a\u003e       \u003ca href=\"http:\/\/www.bodetechnicalservices.com\/wp-content\/uploads\/PAT-Hirschmann-DS-160-Service-Manual.pdf\" target=\"_blank\" title=\"DS160 Console Service Manual\" rel=\"noopener noreferrer\"\u003e\u003cimg alt=\"\" src=\"\/\/cdn.shopify.com\/s\/files\/1\/0702\/9949\/files\/PAT-Hirschmann-DS-160-Operators-Manual-Thumbnail-791x1024_medium.jpg?v=1529951183\" style=\"float: none;\"\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: left;\"\u003e \u003c\/p\u003e\n\u003ch2 style=\"text-align: left;\"\u003eHirschmann DS160 General Information\u003c\/h2\u003e\n\u003cp\u003e The PAT Hirschmann DS 160 Load Moment Indicator (LMI) DS 160 console has been designed to provide the crane operator with the essential information required to operate the machine within its design parameters. The LMI provides the operator with information regarding the length and angle of the boom, working radius, rated load and the total calculated weight being lifted by the crane.\u003c\/p\u003e\n\u003cp\u003eThe DS 160 LMI basically consists of a central microprocessor unit, operator’s console, length and angle sensor, pressure transducer sensor, and anti-two block switches. The system operates on the principle of reference\/real comparison. The real value, resulting from the load measurement is compared with the reference data, stored in the central processor memory and evaluated in the microprocessor. If non permitted conditions are approached, the DS 160 LMI will warn the operator by sounding an audible alarm, lighting a warning light and locking out those functions that may aggravate or worsen the crane’s condition.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/0702\/9949\/files\/BTS_Social_Proof_Narrow_398e8837-6873-4848-8a8e-26b11b44b295.png?v=1519189255\" alt=\"\" style=\"display: block; margin-left: auto; margin-right: auto;\"\u003e\u003c\/p\u003e","published_at":"2014-11-27T12:35:20-05:00","created_at":"2014-11-27T12:35:20-05:00","vendor":"PAT HIRSCHMANN","type":"DISPLAYS","tags":[],"price":219800,"price_min":219800,"price_max":219800,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":1034619744,"title":"Default","option1":"Default","option2":null,"option3":null,"sku":"050-160-060-005","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"050-160-060-005 PAT Hirschmann DS160 Console","public_title":null,"options":["Default"],"price":219800,"weight":20412,"compare_at_price":null,"inventory_quantity":-4,"inventory_management":null,"inventory_policy":"continue","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0702\/9949\/products\/BTS_DS160_Console.jpg?v=1529950847"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0702\/9949\/products\/BTS_DS160_Console.jpg?v=1529950847","options":["Title"],"media":[{"alt":null,"id":14187888736,"position":1,"preview_image":{"aspect_ratio":1.273,"height":396,"width":504,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0702\/9949\/products\/BTS_DS160_Console.jpg?v=1568683712"},"aspect_ratio":1.273,"height":396,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0702\/9949\/products\/BTS_DS160_Console.jpg?v=1568683712","width":504}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch1\u003ePAT Hirschmann DS 160 Console\u003c\/h1\u003e\n\u003cul\u003e\n\u003cli\u003eNo re-calibration\u003c\/li\u003e\n\u003cli\u003eDisplays actual and allowable load, boom length,boom angle, and load radius\u003c\/li\u003e\n\u003cli\u003eUses existing boom components\u003c\/li\u003e\n\u003cli\u003eIntegrated bar graph provides a quick reference ofthe cranes utilization\u003c\/li\u003e\n\u003cli\u003eUser-friendly console and setup\u003c\/li\u003e\n\u003cli\u003eMeets SAE and ANSI B-30.5 standards\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eDS160 Console Operators \u0026amp; Service Manuals:\u003c\/h2\u003e\n\u003cp style=\"text-align: left;\"\u003e\u003ca href=\"http:\/\/www.bodetechnicalservices.com\/wp-content\/uploads\/PAT-Hirschmann-DS-160-Operators-Manual.pdf\" target=\"_blank\" title=\"DS160 Operators Manual\" rel=\"noopener noreferrer\"\u003e\u003cimg alt=\"\" src=\"\/\/cdn.shopify.com\/s\/files\/1\/0702\/9949\/files\/PAT-Hirschmann-DS-160-Operators-Manual-Thumbnail-791x1024_medium.jpg?v=1529951183\" style=\"float: none;\"\u003e\u003c\/a\u003e       \u003ca href=\"http:\/\/www.bodetechnicalservices.com\/wp-content\/uploads\/PAT-Hirschmann-DS-160-Service-Manual.pdf\" target=\"_blank\" title=\"DS160 Console Service Manual\" rel=\"noopener noreferrer\"\u003e\u003cimg alt=\"\" src=\"\/\/cdn.shopify.com\/s\/files\/1\/0702\/9949\/files\/PAT-Hirschmann-DS-160-Operators-Manual-Thumbnail-791x1024_medium.jpg?v=1529951183\" style=\"float: none;\"\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: left;\"\u003e \u003c\/p\u003e\n\u003ch2 style=\"text-align: left;\"\u003eHirschmann DS160 General Information\u003c\/h2\u003e\n\u003cp\u003e The PAT Hirschmann DS 160 Load Moment Indicator (LMI) DS 160 console has been designed to provide the crane operator with the essential information required to operate the machine within its design parameters. The LMI provides the operator with information regarding the length and angle of the boom, working radius, rated load and the total calculated weight being lifted by the crane.\u003c\/p\u003e\n\u003cp\u003eThe DS 160 LMI basically consists of a central microprocessor unit, operator’s console, length and angle sensor, pressure transducer sensor, and anti-two block switches. The system operates on the principle of reference\/real comparison. The real value, resulting from the load measurement is compared with the reference data, stored in the central processor memory and evaluated in the microprocessor. If non permitted conditions are approached, the DS 160 LMI will warn the operator by sounding an audible alarm, lighting a warning light and locking out those functions that may aggravate or worsen the crane’s condition.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/0702\/9949\/files\/BTS_Social_Proof_Narrow_398e8837-6873-4848-8a8e-26b11b44b295.png?v=1519189255\" alt=\"\" style=\"display: block; margin-left: auto; margin-right: auto;\"\u003e\u003c\/p\u003e"}
{"id":387624532,"title":"GS550 LSI Trimble Wireless Display","handle":"gs-550-trimble-lsi-wireless-display-receiver","description":"\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003eThe LSI Trimble GS550 display serves as the backbone of the wireless crane warning system.  The unit integrates both the display and operator interface as well as the computer that manages all the sensors and monitors the crane load chart.  The Trimble GS550 console utilizes direct sequence spread spectrum two way communication to reliably monitor up to 32 sensors in the harshest radio frequency environments with a reception range up to 4,300 feet.  A 6\"long sunlight readable 2 line LCD display allows the operator a simple yet comprehensive overview of crane operations.  \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e \u003ciframe width=\"470\" height=\"290\" src=\"https:\/\/www.youtube.com\/embed\/D9Qfx3yDB5U\" frameborder=\"0\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003ch1\u003e\u003c\/h1\u003e\n\u003ch1\u003eLSI Trimble GS550 Features\u003c\/h1\u003e\n\u003cul\u003e\n\u003cli\u003eMonitors up to 32 sensors simultaneously\u003c\/li\u003e\n\u003cli\u003eDirect Sequence-Spread Spectrum-Two Way Communication\u003c\/li\u003e\n\u003cli\u003eReception range: 4,300 feet \/ 1,300 meters\u003c\/li\u003e\n\u003cli\u003eUser settable limits and alarms for each installed sensor\u003c\/li\u003e\n\u003cli\u003eUSB port allows uploading of load charts or download of data logger content to USB drive\u003c\/li\u003e\n\u003cli\u003eOperators can set up to 99 parts of line\u003c\/li\u003e\n\u003cli\u003eOperating Temperature: -29F to +122F \/ -20C to +50C\u003c\/li\u003e\n\u003cli\u003eRam mounting bracket\u003c\/li\u003e\n\u003cli\u003e6\" long, sunlight readable 2 line x 20 character per line LCD Display\u003c\/li\u003e\n\u003cli\u003eDisplay will data log up to 15,000 events (Events can include: out of limit alarms, productivity data, etc.)\u003c\/li\u003e\n\u003cli\u003eData log content can be downloaded via a USB drive from the onboard USB port\u003c\/li\u003e\n\u003cli\u003eSensors automatically stop transmitting 5 minutes after the display is turned off to preserve sensor battery life\u003c\/li\u003e\n\u003cli\u003eDiagnostic mode\u003c\/li\u003e\n\u003cli\u003eListening mode option for remote sensor monitoring\u003c\/li\u003e\n\u003cli\u003eThe display will trip function lockouts on cranes with installed solenoid valves when limits are exceeded\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch1 style=\"text-align: center;\"\u003e\u003c\/h1\u003e\n\u003ch1 style=\"text-align: center;\"\u003eLSI Trimble GS550 Brochure\u003c\/h1\u003e\n\u003cdiv\u003e\u003ca href=\"http:\/\/bodetechnicalservices.com\/wp-content\/uploads\/LSI-TRIMBLE-GS550-BROCHURE.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/0702\/9949\/files\/LSI_Trimble_GS550_BTS_Crane_Parts_801b3ff9-5bc5-4d84-82f1-2859920c7a2f.png?v=1565118506\" alt=\"\" style=\"display: block; margin-left: auto; margin-right: auto;\"\u003e\u003c\/a\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003ch1\u003e\u003c\/h1\u003e\n\u003ch1\u003e\u003c\/h1\u003e\n\u003ch1\u003eTrimble GS550 Additional Information \u003c\/h1\u003e\n\u003ch1 style=\"text-align: center;\"\u003e\u003c\/h1\u003e\n\u003ch2\u003e\u003c\/h2\u003e\n\u003ch2\u003e\u003c\/h2\u003e\n\u003cp\u003eIt can start as a basic \u003ca href=\"http:\/\/store.bodetechnicalservices.com\/products\/gs-026-lsi-wireless-wind-speed-sensor\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eWind Speed\u003c\/a\u003e, \u003ca href=\"http:\/\/store.bodetechnicalservices.com\/products\/gs-075-b-lsi-wireless-anti-two-block-switch\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eAnti Two Block\u003c\/a\u003e, \u003ca href=\"http:\/\/store.bodetechnicalservices.com\/products\/gc-012-lsi-wireless-12k-load-cell\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eLoad\u003c\/a\u003e, or \u003ca href=\"http:\/\/store.bodetechnicalservices.com\/products\/gs-112-lsi-wirelss-cable-reel\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eBoom Length Angle\u003c\/a\u003e system, or can be utilized as a full rated capacity indicator, monitoring load charts.  All communication between LSI sensors and the GS550 Display is wireless. This innovative technology eliminates cables and costly installation charges. Wireless communication will help you avoid expensive and time consuming troubleshooting of cable breaks, junction boxes and more. The GS550 is a “plug and play” product. If there is a sensor failure, the system immediately informs the operator of the location of the issue. 99 percent of the time the operator can resolve the problem, which eliminates the need to have an on-site technician. Should you ever need to replace a sensor, the new sensor’s ID will automatically replace the old ID in the display. This only takes a few seconds to complete. The GS550 Display will trip function lockouts on cranes with installed solenoid valves when limits are exceeded. Each application has different requirements for system security. The GS550 offers you the ability to easily set password restrictions for all key operating aspects of the system. In addition, the display has a supervisor password level. This extra level of security allows only a supervisor to access restricted areas of the display. The GS550 Display offers users one of the best sunlight readable displays found in the market today, if you wear polarized lenses, the display readability is unparalleled. Each GS550 Display ships standard with a built in data logger that can monitor up to 16,000 events. Data is downloaded with the onboard USB port to a USB drive. You can also utilize the USB port to upload load charts via a USB drive. The display can store over 3,500 pages of load charts \u003c\/p\u003e\n\u003ch1 style=\"text-align: center;\"\u003e \u003c\/h1\u003e\n\u003ch1 style=\"text-align: center;\"\u003eTrimble GS550 Quick Reference Guide \u003c\/h1\u003e\n\u003ch1 style=\"text-align: center;\"\u003e\u003ca href=\"http:\/\/bodetechnicalservices.com\/wp-content\/uploads\/Safe-Load-Indicator-Quick-Reference-Guide.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/0702\/9949\/files\/Trimble_GS550_Quick_Reference.png?v=1565119610\" alt=\"\" style=\"display: block; margin-left: auto; margin-right: auto;\"\u003e\u003c\/a\u003e\u003c\/h1\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch1 style=\"text-align: center;\"\u003eLSI Trimble GS550 Specifications Sheet\u003c\/h1\u003e\n\u003cp\u003e\u003ca href=\"http:\/\/www.bodetechnicalservices.com\/wp-content\/uploads\/BTS%20LSI%20GS550%20Specification.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/0702\/9949\/files\/Trimble_LSI_GS550_Specifications_Sheet_BTS_Crane.png?v=1565119862\" alt=\"\" style=\"display: block; margin-left: auto; margin-right: auto;\"\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/0702\/9949\/files\/BTS_Social_Proof_Narrow_398e8837-6873-4848-8a8e-26b11b44b295.png?v=1519189255\" alt=\"\" style=\"display: block; margin-left: auto; margin-right: auto;\"\u003e\u003c\/p\u003e","published_at":"2018-06-15T07:07:17-04:00","created_at":"2014-11-27T12:36:04-05:00","vendor":"TRIMBLE LSI","type":"DISPLAYS","tags":["Display","GS550","LSI","Trimble","Wireless"],"price":265700,"price_min":265700,"price_max":265700,"available":true,"price_varies":false,"compare_at_price":265700,"compare_at_price_min":265700,"compare_at_price_max":265700,"compare_at_price_varies":false,"variants":[{"id":1034622468,"title":"Default","option1":"Default","option2":null,"option3":null,"sku":"GS550-00","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"GS550 LSI Trimble Wireless Display","public_title":null,"options":["Default"],"price":265700,"weight":14061,"compare_at_price":265700,"inventory_quantity":-5,"inventory_management":null,"inventory_policy":"continue","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0702\/9949\/products\/Trimble_GS550_Display.png?v=1611411348","\/\/cdn.shopify.com\/s\/files\/1\/0702\/9949\/products\/BTSTrimbleGS550Display.png?v=1611411381","\/\/cdn.shopify.com\/s\/files\/1\/0702\/9949\/products\/BTSTrimbleGS550QuickReference.png?v=1611411400","\/\/cdn.shopify.com\/s\/files\/1\/0702\/9949\/products\/TrimbleLSIGS550DisplaySize.png?v=1611411419","\/\/cdn.shopify.com\/s\/files\/1\/0702\/9949\/products\/BTSTrimbleDealerLogo_4155dbcd-ba7c-43a9-92aa-fae83fc291cf.jpg?v=1611411437"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0702\/9949\/products\/Trimble_GS550_Display.png?v=1611411348","options":["Title"],"media":[{"alt":"Trimble LSI GS550 Display For Sale","id":14200176736,"position":1,"preview_image":{"aspect_ratio":1.576,"height":547,"width":862,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0702\/9949\/products\/Trimble_GS550_Display.png?v=1568683727"},"aspect_ratio":1.576,"height":547,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0702\/9949\/products\/Trimble_GS550_Display.png?v=1568683727","width":862},{"alt":"Trimble LSI GS550 Computer Brochure","id":14835143147687,"position":2,"preview_image":{"aspect_ratio":0.772,"height":2294,"width":1770,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0702\/9949\/products\/BTSTrimbleGS550Display.png?v=1611249213"},"aspect_ratio":0.772,"height":2294,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0702\/9949\/products\/BTSTrimbleGS550Display.png?v=1611249213","width":1770},{"alt":"Trimble LSI GS50 Display Guide","id":14835189874855,"position":3,"preview_image":{"aspect_ratio":0.773,"height":2358,"width":1822,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0702\/9949\/products\/BTSTrimbleGS550QuickReference.png?v=1611249333"},"aspect_ratio":0.773,"height":2358,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0702\/9949\/products\/BTSTrimbleGS550QuickReference.png?v=1611249333","width":1822},{"alt":"Trimble LSI GS550 Size ","id":14835336511655,"position":4,"preview_image":{"aspect_ratio":1.322,"height":1766,"width":2334,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0702\/9949\/products\/TrimbleLSIGS550DisplaySize.png?v=1611249716"},"aspect_ratio":1.322,"height":1766,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0702\/9949\/products\/TrimbleLSIGS550DisplaySize.png?v=1611249716","width":2334},{"alt":"Trimble LSI Dealer BTS Crane Parts","id":11488956940455,"position":5,"preview_image":{"aspect_ratio":1.544,"height":711,"width":1098,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0702\/9949\/products\/BTSTrimbleDealerLogo_4155dbcd-ba7c-43a9-92aa-fae83fc291cf.jpg?v=1599675003"},"aspect_ratio":1.544,"height":711,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0702\/9949\/products\/BTSTrimbleDealerLogo_4155dbcd-ba7c-43a9-92aa-fae83fc291cf.jpg?v=1599675003","width":1098}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003eThe LSI Trimble GS550 display serves as the backbone of the wireless crane warning system.  The unit integrates both the display and operator interface as well as the computer that manages all the sensors and monitors the crane load chart.  The Trimble GS550 console utilizes direct sequence spread spectrum two way communication to reliably monitor up to 32 sensors in the harshest radio frequency environments with a reception range up to 4,300 feet.  A 6\"long sunlight readable 2 line LCD display allows the operator a simple yet comprehensive overview of crane operations.  \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e \u003ciframe width=\"470\" height=\"290\" src=\"https:\/\/www.youtube.com\/embed\/D9Qfx3yDB5U\" frameborder=\"0\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003ch1\u003e\u003c\/h1\u003e\n\u003ch1\u003eLSI Trimble GS550 Features\u003c\/h1\u003e\n\u003cul\u003e\n\u003cli\u003eMonitors up to 32 sensors simultaneously\u003c\/li\u003e\n\u003cli\u003eDirect Sequence-Spread Spectrum-Two Way Communication\u003c\/li\u003e\n\u003cli\u003eReception range: 4,300 feet \/ 1,300 meters\u003c\/li\u003e\n\u003cli\u003eUser settable limits and alarms for each installed sensor\u003c\/li\u003e\n\u003cli\u003eUSB port allows uploading of load charts or download of data logger content to USB drive\u003c\/li\u003e\n\u003cli\u003eOperators can set up to 99 parts of line\u003c\/li\u003e\n\u003cli\u003eOperating Temperature: -29F to +122F \/ -20C to +50C\u003c\/li\u003e\n\u003cli\u003eRam mounting bracket\u003c\/li\u003e\n\u003cli\u003e6\" long, sunlight readable 2 line x 20 character per line LCD Display\u003c\/li\u003e\n\u003cli\u003eDisplay will data log up to 15,000 events (Events can include: out of limit alarms, productivity data, etc.)\u003c\/li\u003e\n\u003cli\u003eData log content can be downloaded via a USB drive from the onboard USB port\u003c\/li\u003e\n\u003cli\u003eSensors automatically stop transmitting 5 minutes after the display is turned off to preserve sensor battery life\u003c\/li\u003e\n\u003cli\u003eDiagnostic mode\u003c\/li\u003e\n\u003cli\u003eListening mode option for remote sensor monitoring\u003c\/li\u003e\n\u003cli\u003eThe display will trip function lockouts on cranes with installed solenoid valves when limits are exceeded\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch1 style=\"text-align: center;\"\u003e\u003c\/h1\u003e\n\u003ch1 style=\"text-align: center;\"\u003eLSI Trimble GS550 Brochure\u003c\/h1\u003e\n\u003cdiv\u003e\u003ca href=\"http:\/\/bodetechnicalservices.com\/wp-content\/uploads\/LSI-TRIMBLE-GS550-BROCHURE.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/0702\/9949\/files\/LSI_Trimble_GS550_BTS_Crane_Parts_801b3ff9-5bc5-4d84-82f1-2859920c7a2f.png?v=1565118506\" alt=\"\" style=\"display: block; margin-left: auto; margin-right: auto;\"\u003e\u003c\/a\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003ch1\u003e\u003c\/h1\u003e\n\u003ch1\u003e\u003c\/h1\u003e\n\u003ch1\u003eTrimble GS550 Additional Information \u003c\/h1\u003e\n\u003ch1 style=\"text-align: center;\"\u003e\u003c\/h1\u003e\n\u003ch2\u003e\u003c\/h2\u003e\n\u003ch2\u003e\u003c\/h2\u003e\n\u003cp\u003eIt can start as a basic \u003ca href=\"http:\/\/store.bodetechnicalservices.com\/products\/gs-026-lsi-wireless-wind-speed-sensor\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eWind Speed\u003c\/a\u003e, \u003ca href=\"http:\/\/store.bodetechnicalservices.com\/products\/gs-075-b-lsi-wireless-anti-two-block-switch\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eAnti Two Block\u003c\/a\u003e, \u003ca href=\"http:\/\/store.bodetechnicalservices.com\/products\/gc-012-lsi-wireless-12k-load-cell\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eLoad\u003c\/a\u003e, or \u003ca href=\"http:\/\/store.bodetechnicalservices.com\/products\/gs-112-lsi-wirelss-cable-reel\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eBoom Length Angle\u003c\/a\u003e system, or can be utilized as a full rated capacity indicator, monitoring load charts.  All communication between LSI sensors and the GS550 Display is wireless. This innovative technology eliminates cables and costly installation charges. Wireless communication will help you avoid expensive and time consuming troubleshooting of cable breaks, junction boxes and more. The GS550 is a “plug and play” product. If there is a sensor failure, the system immediately informs the operator of the location of the issue. 99 percent of the time the operator can resolve the problem, which eliminates the need to have an on-site technician. Should you ever need to replace a sensor, the new sensor’s ID will automatically replace the old ID in the display. This only takes a few seconds to complete. The GS550 Display will trip function lockouts on cranes with installed solenoid valves when limits are exceeded. Each application has different requirements for system security. The GS550 offers you the ability to easily set password restrictions for all key operating aspects of the system. In addition, the display has a supervisor password level. This extra level of security allows only a supervisor to access restricted areas of the display. The GS550 Display offers users one of the best sunlight readable displays found in the market today, if you wear polarized lenses, the display readability is unparalleled. Each GS550 Display ships standard with a built in data logger that can monitor up to 16,000 events. Data is downloaded with the onboard USB port to a USB drive. You can also utilize the USB port to upload load charts via a USB drive. The display can store over 3,500 pages of load charts \u003c\/p\u003e\n\u003ch1 style=\"text-align: center;\"\u003e \u003c\/h1\u003e\n\u003ch1 style=\"text-align: center;\"\u003eTrimble GS550 Quick Reference Guide \u003c\/h1\u003e\n\u003ch1 style=\"text-align: center;\"\u003e\u003ca href=\"http:\/\/bodetechnicalservices.com\/wp-content\/uploads\/Safe-Load-Indicator-Quick-Reference-Guide.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/0702\/9949\/files\/Trimble_GS550_Quick_Reference.png?v=1565119610\" alt=\"\" style=\"display: block; margin-left: auto; margin-right: auto;\"\u003e\u003c\/a\u003e\u003c\/h1\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch1 style=\"text-align: center;\"\u003eLSI Trimble GS550 Specifications Sheet\u003c\/h1\u003e\n\u003cp\u003e\u003ca href=\"http:\/\/www.bodetechnicalservices.com\/wp-content\/uploads\/BTS%20LSI%20GS550%20Specification.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/0702\/9949\/files\/Trimble_LSI_GS550_Specifications_Sheet_BTS_Crane.png?v=1565119862\" alt=\"\" style=\"display: block; margin-left: auto; margin-right: auto;\"\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/0702\/9949\/files\/BTS_Social_Proof_Narrow_398e8837-6873-4848-8a8e-26b11b44b295.png?v=1519189255\" alt=\"\" style=\"display: block; margin-left: auto; margin-right: auto;\"\u003e\u003c\/p\u003e"}
{"id":387622672,"title":"PAT DS85 Console","handle":"pat-ds85-console","description":"\u003ch1\u003ePAT DS85 Replacement Procedure\u003c\/h1\u003e\n\u003cp\u003eReplacement of an aging PAT DS85 system is a simple process of removing your old console and plugging in a new one.  There are two main components of the LMI system that are involved in this replacement process.  The first is the replacement of the actual display console itself.  The second is the download and re-upload of your existing crane specific software.  \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIts a simple three step process:\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003col\u003e\n\u003cli\u003eUnplug the existing console and ship it to one of our locations. (Please Contact Us Directly for Information)\u003c\/li\u003e\n\u003cli\u003eOur technicians will extract the crane specific software from the old console, upload it to the new DS85, and send the new one back.\u003c\/li\u003e\n\u003cli\u003eWhen the new console arrives simply plug it back in and the process is complete\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003c\/ol\u003e\n\u003cp\u003eNOTE:  Price includes both the new console and the software extraction and upload process.  \u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/0702\/9949\/files\/PAT_DS85_Replacement_Console.png?v=1506018161\" alt=\"\" style=\"display: block; margin-left: auto; margin-right: auto;\" width=\"575\" height=\"317\"\u003e\u003c\/p\u003e\n\u003cp\u003e  \u003c\/p\u003e\n\u003ch2\u003eGeneral PAT DS85 Console Info\u003c\/h2\u003e\n\u003cdiv title=\"Page 8\"\u003e\n\u003cdiv\u003e\n\u003cdiv\u003eThe PAT DS 85 system is a CAN bus system consisting of a central micro processor unit or operating console, length and angle sensor, pressure transducers, and anti-two block switch. The Load Moment Indicator system operates on the principle of reference\/real comparison. The real value, resulting from the pressure measurement is compared with the reference data, stored in the central processor memory and evaluated in the micro processor. When limits are reached, an overload warning signal is generated at the operator’s console. At the same time, the movement causing the error such as hoist up, telescope out and boom down, will be stopped. The fixed data regarding the crane, such as capacity charts, boom weights, centers of gravity and dimensions are stored in memory in the central processor unit. This data is the reference information used to calculate the operating conditions. The operating modes are selected by the operating mode key on the console by scrolling through the text messages defining the boom truck configuration. The crane load is measured by pressure transducers attached to the piston and rod side of the hoist cylinders. Boom length and boom angle are transmitted by length\/angle CAN bus node mounted on the side of the boom in the angle sensor box. The length sensor\/cable reel is mounted inside the base which measures the boom length. The PAT RATB works like our normal Anti-Two-Block. It alerts to an impending two-block condition. This alert can come in the form of an audible alarm and visual LED or with the optional function lockout if the crane is so equipped. The radio anti two block transmitter switch transmits a error condition when the switch closes or transmits an OK signal, no less than every two seconds to the receive. The transmitters send a unique serialized frequency on up to three separate channels to ensure accurate and consistent reception of data and to reduce the possibility of unnoticed failure. The transmitter is powered by 4 C batteries. The receiver is mounted into a receiver box locate near the operating station. The receiver box provides the following indications: Power (status), LINK, Low Battery, and A2B. The receiver will work 10...32VDC and fused to 1 Amp.   \u003c\/div\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003cdiv style=\"text-align: center;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0702\/9949\/files\/PAT_DS85_Replacement_Layout.png?v=1569508041\" style=\"margin: 0pxpx 0pxpx 0pxpx 0pxpx; float: none;\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eBTS is a leading provider of PAT Hirschmann LMI components including the PAT DS85 replacement consoles.  With 38 years of industry experience, and thousands of customers across the world, you can trust that we provide fast cost effective service.  Contact us toll free in the US at 855.BODE.TEC or internationally at +1.303.433.8878\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/0702\/9949\/files\/BTS_Social_Proof_Narrow_c69777d4-f7d7-4fd7-834d-b1f9ba172580.png?v=1506018491\" alt=\"\" style=\"display: block; margin-left: auto; margin-right: auto;\" width=\"790\" height=\"148\"\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","published_at":"2018-06-15T07:07:45-04:00","created_at":"2014-11-27T12:35:19-05:00","vendor":"PAT HIRSCHMANN","type":"DISPLAYS","tags":["DS85","Hirschmann","PAT"],"price":229800,"price_min":229800,"price_max":229800,"available":true,"price_varies":false,"compare_at_price":273400,"compare_at_price_min":273400,"compare_at_price_max":273400,"compare_at_price_varies":false,"variants":[{"id":1034619696,"title":"Default","option1":"Default","option2":null,"option3":null,"sku":"031-300-060-455","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"PAT DS85 Console","public_title":null,"options":["Default"],"price":229800,"weight":20412,"compare_at_price":273400,"inventory_quantity":-3,"inventory_management":null,"inventory_policy":"continue","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0702\/9949\/products\/PAT_DS85_Replacement.png?v=1506017616"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0702\/9949\/products\/PAT_DS85_Replacement.png?v=1506017616","options":["Title"],"media":[{"alt":null,"id":14187626592,"position":1,"preview_image":{"aspect_ratio":2.432,"height":838,"width":2038,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0702\/9949\/products\/PAT_DS85_Replacement.png?v=1568683712"},"aspect_ratio":2.432,"height":838,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0702\/9949\/products\/PAT_DS85_Replacement.png?v=1568683712","width":2038}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch1\u003ePAT DS85 Replacement Procedure\u003c\/h1\u003e\n\u003cp\u003eReplacement of an aging PAT DS85 system is a simple process of removing your old console and plugging in a new one.  There are two main components of the LMI system that are involved in this replacement process.  The first is the replacement of the actual display console itself.  The second is the download and re-upload of your existing crane specific software.  \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIts a simple three step process:\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003col\u003e\n\u003cli\u003eUnplug the existing console and ship it to one of our locations. (Please Contact Us Directly for Information)\u003c\/li\u003e\n\u003cli\u003eOur technicians will extract the crane specific software from the old console, upload it to the new DS85, and send the new one back.\u003c\/li\u003e\n\u003cli\u003eWhen the new console arrives simply plug it back in and the process is complete\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003c\/ol\u003e\n\u003cp\u003eNOTE:  Price includes both the new console and the software extraction and upload process.  \u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/0702\/9949\/files\/PAT_DS85_Replacement_Console.png?v=1506018161\" alt=\"\" style=\"display: block; margin-left: auto; margin-right: auto;\" width=\"575\" height=\"317\"\u003e\u003c\/p\u003e\n\u003cp\u003e  \u003c\/p\u003e\n\u003ch2\u003eGeneral PAT DS85 Console Info\u003c\/h2\u003e\n\u003cdiv title=\"Page 8\"\u003e\n\u003cdiv\u003e\n\u003cdiv\u003eThe PAT DS 85 system is a CAN bus system consisting of a central micro processor unit or operating console, length and angle sensor, pressure transducers, and anti-two block switch. The Load Moment Indicator system operates on the principle of reference\/real comparison. The real value, resulting from the pressure measurement is compared with the reference data, stored in the central processor memory and evaluated in the micro processor. When limits are reached, an overload warning signal is generated at the operator’s console. At the same time, the movement causing the error such as hoist up, telescope out and boom down, will be stopped. The fixed data regarding the crane, such as capacity charts, boom weights, centers of gravity and dimensions are stored in memory in the central processor unit. This data is the reference information used to calculate the operating conditions. The operating modes are selected by the operating mode key on the console by scrolling through the text messages defining the boom truck configuration. The crane load is measured by pressure transducers attached to the piston and rod side of the hoist cylinders. Boom length and boom angle are transmitted by length\/angle CAN bus node mounted on the side of the boom in the angle sensor box. The length sensor\/cable reel is mounted inside the base which measures the boom length. The PAT RATB works like our normal Anti-Two-Block. It alerts to an impending two-block condition. This alert can come in the form of an audible alarm and visual LED or with the optional function lockout if the crane is so equipped. The radio anti two block transmitter switch transmits a error condition when the switch closes or transmits an OK signal, no less than every two seconds to the receive. The transmitters send a unique serialized frequency on up to three separate channels to ensure accurate and consistent reception of data and to reduce the possibility of unnoticed failure. The transmitter is powered by 4 C batteries. The receiver is mounted into a receiver box locate near the operating station. The receiver box provides the following indications: Power (status), LINK, Low Battery, and A2B. The receiver will work 10...32VDC and fused to 1 Amp.   \u003c\/div\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003cdiv style=\"text-align: center;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0702\/9949\/files\/PAT_DS85_Replacement_Layout.png?v=1569508041\" style=\"margin: 0pxpx 0pxpx 0pxpx 0pxpx; float: none;\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eBTS is a leading provider of PAT Hirschmann LMI components including the PAT DS85 replacement consoles.  With 38 years of industry experience, and thousands of customers across the world, you can trust that we provide fast cost effective service.  Contact us toll free in the US at 855.BODE.TEC or internationally at +1.303.433.8878\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/0702\/9949\/files\/BTS_Social_Proof_Narrow_c69777d4-f7d7-4fd7-834d-b1f9ba172580.png?v=1506018491\" alt=\"\" style=\"display: block; margin-left: auto; margin-right: auto;\" width=\"790\" height=\"148\"\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e"}
Sale
$ 2,298.00 $ 2,734.00
{"id":387624544,"title":"Trimble LSI GS820 Wireless Display","handle":"trimble-lsi-gs820-wireless-display","description":"\u003cdiv style=\"text-align: left;\" title=\"Page 1\" class=\"page\"\u003e\n\u003cp\u003eThe LSI Trimble GS820 Graphical Display serves as the upgraded console and computer for a wireless crane warning or LMI replacement system.  Users can view up to 20 fields of data from the 6\" sunlight readable graphical display with transflective technology for excellent night time readability.  The Trimble GS830 has a reception range up to 4,300 feet, the ability to monitor up to 32 sensors, and the capability to easily upload crane specific load charts that trigger crane lockouts.  \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"text-align: center;\" title=\"Page 1\" class=\"page\"\u003e\u003c\/div\u003e\n\u003cdiv style=\"text-align: center;\" title=\"Page 1\" class=\"page\"\u003e\u003cimg style=\"display: block; margin-left: auto; margin-right: auto; float: none;\" src=\"\/\/cdn.shopify.com\/s\/files\/1\/0702\/9949\/files\/Trimble_LSI_GS820.jpg?v=1506526548\" alt=\"Trimble LSI GS820\"\u003e\u003c\/div\u003e\n\u003cdiv title=\"Page 1\" class=\"page\"\u003e\u003c\/div\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch1\u003eLSI Trimble GS820 Graphical Display Features\u003c\/h1\u003e\n\u003cul\u003e\n\u003cli\u003e6\" Transflective sunlight readable display \u003c\/li\u003e\n\u003cli\u003eMonitors up to 32 sensors\u003c\/li\u003e\n\u003cli\u003eReception range up to 4,300 feet\u003c\/li\u003e\n\u003cli\u003eCrane specific load charts can be installed\u003c\/li\u003e\n\u003cli\u003eSystem can trigger preinstalled crane lockouts\u003c\/li\u003e\n\u003cli\u003eUser settable limits and alarms\u003c\/li\u003e\n\u003cli\u003eOperating temperature -4°F to +122°F; -20°C to +50°C\u003c\/li\u003e\n\u003cli\u003e2 Year manufacturers warranty against defects  \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch1 style=\"text-align: center;\"\u003e\u003c\/h1\u003e\n\u003ch1 style=\"text-align: center;\"\u003eLSI Trimble GS820 Brochure \u003c\/h1\u003e\n\u003cp style=\"text-align: left;\"\u003e\u003ca title=\"LSI Trimble GS820 Brochure\" href=\"http:\/\/bodetechnicalservices.com\/wp-content\/uploads\/LSI-TRIMBLE-GS820-BROCHURE.pdf\" target=\"_blank\"\u003e\u003cimg style=\"float: none; display: block; margin-left: auto; margin-right: auto;\" src=\"\/\/cdn.shopify.com\/s\/files\/1\/0702\/9949\/files\/Trimble_GS820_Brochure.png?v=1565188115\" alt=\"LSI Trimble GS820 Brochure\"\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThe Trimble GS820 computer combines the ability to monitor a wide range of sensors with the capability of adding load charts to the system. It features a built in data logger for logging critical information and the versatility to monitor a combination of many different types of sensors.\u003c\/p\u003e\n\u003cp\u003eAll communication between Trimble LSI sensors and the GS820 Graphical Display is via spread spectrum direct sequence two way communication. This innovative technology eliminates cables and all the potential for water intrusion, corrosion, breakage while also allowing for reliable communication in the harshest of radio frequency environments.  \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch1 style=\"text-align: center;\"\u003eTrimble GS820 Specifications Sheet\u003c\/h1\u003e\n\u003cp style=\"text-align: left;\"\u003e\u003ca title=\"LSI Trimble GS820 Specifications Sheet\" href=\"http:\/\/bodetechnicalservices.com\/wp-content\/uploads\/gs820specifications.pdf\" target=\"_blank\"\u003e\u003cimg style=\"display: block; margin-left: auto; margin-right: auto; float: none;\" src=\"\/\/cdn.shopify.com\/s\/files\/1\/0702\/9949\/files\/Trimble_GS820_Specifications_Sheet_BTS_Crane_41d21736-1398-46ce-bfe1-45caf8d85025.png?v=1565188277\" alt=\"LSI Trimble GS820 Specifications Sheet\"\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThe Trimble LSI GS820 wireless display is a “plug and play” product. If there is a sensor failure, the system immediately informs the operator of the location of the issue. Most often the operator can resolve the problem, which eliminates the need to have an on-site technician.\u003c\/p\u003e\n\u003cp\u003eShould you ever need to replace a sensor, the new sensor’s ID will automatically replace the old ID in the display. This only takes a few seconds to complete.\u003c\/p\u003e\n\u003cp\u003eOften in the field, each application has different requirements for system security. The GS820 offers you the ability to easily set password restrictions for all key operating aspects of the system. In addition, the display has a supervisor password level. This extra level of security allows only a supervisor to access restricted areas of the display.\u003c\/p\u003e\n\u003ch1\u003e\u003c\/h1\u003e\n\u003ch1 style=\"text-align: center;\"\u003eTrimble GS820 Quick Reference Guide\u003c\/h1\u003e\n\u003cp style=\"text-align: left;\"\u003e\u003ca title=\"Trimble GS820 Quick Reference Guide\" href=\"http:\/\/bodetechnicalservices.com\/wp-content\/uploads\/LSI-TRIMBLE-GS820-QUICK-REFERENCE.pdf\" target=\"_blank\"\u003e\u003cimg style=\"display: block; margin-left: auto; margin-right: auto; float: none;\" src=\"\/\/cdn.shopify.com\/s\/files\/1\/0702\/9949\/files\/Trimble_GS820_Quick_Reference_Guide.png?v=1565189252\" alt=\"Trimble GS820 Quick Reference Guide BTS Crane Parts\"\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eWe can customize the GS820 Display screen to show graphics that are useful for your specific application. Utilizing a transflective LCD display, the GS820 will automatically adjust the contrast and brightness to suit active light conditions and readability.\u003c\/p\u003e\n\u003cp\u003eThe GS820 Graphical Display will trip function lockouts on cranes with installed solenoid valves when limits are exceeded.\u003c\/p\u003e\n\u003cp\u003eEach Trimble LSI GS820 Wireless Display ships standard with a built in data logger that can monitor up to 32,000 events. Data is downloaded with the onboard USB port to a USB drive. You can also utilize the USB port to upload load charts via a USB drive. The display can store over 3,500 pages of load charts.\u003c\/p\u003e\n\u003cp\u003eUsers also have the option to order a stainless steel GS820 Display that ships standard with CSA-US Class 1, Div 2 certifications for marine\/ offshore\/refinery applications.\u003c\/p\u003e\n\u003cdiv style=\"text-align: center;\"\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/0702\/9949\/files\/BTS_Social_Proof_Narrow_c69777d4-f7d7-4fd7-834d-b1f9ba172580.png?v=1506018491\" alt=\"\" style=\"margin: 0pxpx 0pxpx 0pxpx 0pxpx; float: none;\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"section\"\u003e\n\u003cdiv class=\"layoutArea\"\u003e\n\u003cdiv class=\"column\"\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"column\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","published_at":"2018-06-15T07:07:46-04:00","created_at":"2014-11-27T12:36:04-05:00","vendor":"TRIMBLE LSI","type":"DISPLAYS","tags":[],"price":350400,"price_min":350400,"price_max":350400,"available":true,"price_varies":false,"compare_at_price":350400,"compare_at_price_min":350400,"compare_at_price_max":350400,"compare_at_price_varies":false,"variants":[{"id":1034622480,"title":"Default","option1":"Default","option2":null,"option3":null,"sku":"GS820","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Trimble LSI GS820 Wireless Display","public_title":null,"options":["Default"],"price":350400,"weight":9072,"compare_at_price":350400,"inventory_quantity":0,"inventory_management":null,"inventory_policy":"continue","barcode":"GS 820","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0702\/9949\/products\/Trimble_GS820_Display.png?v=1611414906","\/\/cdn.shopify.com\/s\/files\/1\/0702\/9949\/products\/TrimbleGS820DisplayBrochure.png?v=1611414931","\/\/cdn.shopify.com\/s\/files\/1\/0702\/9949\/products\/TrimbleGS820Size.png?v=1611414956","\/\/cdn.shopify.com\/s\/files\/1\/0702\/9949\/products\/TrimbleGS820QuickReferenceP1.png?v=1611415150","\/\/cdn.shopify.com\/s\/files\/1\/0702\/9949\/products\/TrimbleGS820QuickReferenePage2.png?v=1611415150","\/\/cdn.shopify.com\/s\/files\/1\/0702\/9949\/products\/BTSTrimbleDealerLogo_5daca918-3bcc-4882-a674-4b06351367fb.jpg?v=1611415150"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0702\/9949\/products\/Trimble_GS820_Display.png?v=1611414906","options":["Title"],"media":[{"alt":"Trimble GS820 Display For Sale","id":14200275040,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0702\/9949\/products\/Trimble_GS820_Display.png?v=1568683727"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0702\/9949\/products\/Trimble_GS820_Display.png?v=1568683727","width":600},{"alt":"Trimble GS820 Computer Brochure","id":14860642320551,"position":2,"preview_image":{"aspect_ratio":0.771,"height":2336,"width":1800,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0702\/9949\/products\/TrimbleGS820DisplayBrochure.png?v=1611414884"},"aspect_ratio":0.771,"height":2336,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0702\/9949\/products\/TrimbleGS820DisplayBrochure.png?v=1611414884","width":1800},{"alt":"Trimble GS820 Crane Display Size","id":14860643565735,"position":3,"preview_image":{"aspect_ratio":1.33,"height":2536,"width":3374,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0702\/9949\/products\/TrimbleGS820Size.png?v=1611414890"},"aspect_ratio":1.33,"height":2536,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0702\/9949\/products\/TrimbleGS820Size.png?v=1611414890","width":3374},{"alt":"Trimble GS820 Quick Reference Guide P1","id":14860678103207,"position":4,"preview_image":{"aspect_ratio":0.762,"height":2364,"width":1802,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0702\/9949\/products\/TrimbleGS820QuickReferenceP1.png?v=1611415091"},"aspect_ratio":0.762,"height":2364,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0702\/9949\/products\/TrimbleGS820QuickReferenceP1.png?v=1611415091","width":1802},{"alt":"Trimble GS820 Display Reference Guide P2","id":14860680659111,"position":5,"preview_image":{"aspect_ratio":0.765,"height":2354,"width":1800,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0702\/9949\/products\/TrimbleGS820QuickReferenePage2.png?v=1611415103"},"aspect_ratio":0.765,"height":2354,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0702\/9949\/products\/TrimbleGS820QuickReferenePage2.png?v=1611415103","width":1800},{"alt":"Trimble LSI Dealer BTS Crane Parts Inc","id":11488994492583,"position":6,"preview_image":{"aspect_ratio":1.544,"height":711,"width":1098,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0702\/9949\/products\/BTSTrimbleDealerLogo_5daca918-3bcc-4882-a674-4b06351367fb.jpg?v=1599675125"},"aspect_ratio":1.544,"height":711,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0702\/9949\/products\/BTSTrimbleDealerLogo_5daca918-3bcc-4882-a674-4b06351367fb.jpg?v=1599675125","width":1098}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv style=\"text-align: left;\" title=\"Page 1\" class=\"page\"\u003e\n\u003cp\u003eThe LSI Trimble GS820 Graphical Display serves as the upgraded console and computer for a wireless crane warning or LMI replacement system.  Users can view up to 20 fields of data from the 6\" sunlight readable graphical display with transflective technology for excellent night time readability.  The Trimble GS830 has a reception range up to 4,300 feet, the ability to monitor up to 32 sensors, and the capability to easily upload crane specific load charts that trigger crane lockouts.  \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"text-align: center;\" title=\"Page 1\" class=\"page\"\u003e\u003c\/div\u003e\n\u003cdiv style=\"text-align: center;\" title=\"Page 1\" class=\"page\"\u003e\u003cimg style=\"display: block; margin-left: auto; margin-right: auto; float: none;\" src=\"\/\/cdn.shopify.com\/s\/files\/1\/0702\/9949\/files\/Trimble_LSI_GS820.jpg?v=1506526548\" alt=\"Trimble LSI GS820\"\u003e\u003c\/div\u003e\n\u003cdiv title=\"Page 1\" class=\"page\"\u003e\u003c\/div\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch1\u003eLSI Trimble GS820 Graphical Display Features\u003c\/h1\u003e\n\u003cul\u003e\n\u003cli\u003e6\" Transflective sunlight readable display \u003c\/li\u003e\n\u003cli\u003eMonitors up to 32 sensors\u003c\/li\u003e\n\u003cli\u003eReception range up to 4,300 feet\u003c\/li\u003e\n\u003cli\u003eCrane specific load charts can be installed\u003c\/li\u003e\n\u003cli\u003eSystem can trigger preinstalled crane lockouts\u003c\/li\u003e\n\u003cli\u003eUser settable limits and alarms\u003c\/li\u003e\n\u003cli\u003eOperating temperature -4°F to +122°F; -20°C to +50°C\u003c\/li\u003e\n\u003cli\u003e2 Year manufacturers warranty against defects  \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch1 style=\"text-align: center;\"\u003e\u003c\/h1\u003e\n\u003ch1 style=\"text-align: center;\"\u003eLSI Trimble GS820 Brochure \u003c\/h1\u003e\n\u003cp style=\"text-align: left;\"\u003e\u003ca title=\"LSI Trimble GS820 Brochure\" href=\"http:\/\/bodetechnicalservices.com\/wp-content\/uploads\/LSI-TRIMBLE-GS820-BROCHURE.pdf\" target=\"_blank\"\u003e\u003cimg style=\"float: none; display: block; margin-left: auto; margin-right: auto;\" src=\"\/\/cdn.shopify.com\/s\/files\/1\/0702\/9949\/files\/Trimble_GS820_Brochure.png?v=1565188115\" alt=\"LSI Trimble GS820 Brochure\"\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThe Trimble GS820 computer combines the ability to monitor a wide range of sensors with the capability of adding load charts to the system. It features a built in data logger for logging critical information and the versatility to monitor a combination of many different types of sensors.\u003c\/p\u003e\n\u003cp\u003eAll communication between Trimble LSI sensors and the GS820 Graphical Display is via spread spectrum direct sequence two way communication. This innovative technology eliminates cables and all the potential for water intrusion, corrosion, breakage while also allowing for reliable communication in the harshest of radio frequency environments.  \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch1 style=\"text-align: center;\"\u003eTrimble GS820 Specifications Sheet\u003c\/h1\u003e\n\u003cp style=\"text-align: left;\"\u003e\u003ca title=\"LSI Trimble GS820 Specifications Sheet\" href=\"http:\/\/bodetechnicalservices.com\/wp-content\/uploads\/gs820specifications.pdf\" target=\"_blank\"\u003e\u003cimg style=\"display: block; margin-left: auto; margin-right: auto; float: none;\" src=\"\/\/cdn.shopify.com\/s\/files\/1\/0702\/9949\/files\/Trimble_GS820_Specifications_Sheet_BTS_Crane_41d21736-1398-46ce-bfe1-45caf8d85025.png?v=1565188277\" alt=\"LSI Trimble GS820 Specifications Sheet\"\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThe Trimble LSI GS820 wireless display is a “plug and play” product. If there is a sensor failure, the system immediately informs the operator of the location of the issue. Most often the operator can resolve the problem, which eliminates the need to have an on-site technician.\u003c\/p\u003e\n\u003cp\u003eShould you ever need to replace a sensor, the new sensor’s ID will automatically replace the old ID in the display. This only takes a few seconds to complete.\u003c\/p\u003e\n\u003cp\u003eOften in the field, each application has different requirements for system security. The GS820 offers you the ability to easily set password restrictions for all key operating aspects of the system. In addition, the display has a supervisor password level. This extra level of security allows only a supervisor to access restricted areas of the display.\u003c\/p\u003e\n\u003ch1\u003e\u003c\/h1\u003e\n\u003ch1 style=\"text-align: center;\"\u003eTrimble GS820 Quick Reference Guide\u003c\/h1\u003e\n\u003cp style=\"text-align: left;\"\u003e\u003ca title=\"Trimble GS820 Quick Reference Guide\" href=\"http:\/\/bodetechnicalservices.com\/wp-content\/uploads\/LSI-TRIMBLE-GS820-QUICK-REFERENCE.pdf\" target=\"_blank\"\u003e\u003cimg style=\"display: block; margin-left: auto; margin-right: auto; float: none;\" src=\"\/\/cdn.shopify.com\/s\/files\/1\/0702\/9949\/files\/Trimble_GS820_Quick_Reference_Guide.png?v=1565189252\" alt=\"Trimble GS820 Quick Reference Guide BTS Crane Parts\"\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eWe can customize the GS820 Display screen to show graphics that are useful for your specific application. Utilizing a transflective LCD display, the GS820 will automatically adjust the contrast and brightness to suit active light conditions and readability.\u003c\/p\u003e\n\u003cp\u003eThe GS820 Graphical Display will trip function lockouts on cranes with installed solenoid valves when limits are exceeded.\u003c\/p\u003e\n\u003cp\u003eEach Trimble LSI GS820 Wireless Display ships standard with a built in data logger that can monitor up to 32,000 events. Data is downloaded with the onboard USB port to a USB drive. You can also utilize the USB port to upload load charts via a USB drive. The display can store over 3,500 pages of load charts.\u003c\/p\u003e\n\u003cp\u003eUsers also have the option to order a stainless steel GS820 Display that ships standard with CSA-US Class 1, Div 2 certifications for marine\/ offshore\/refinery applications.\u003c\/p\u003e\n\u003cdiv style=\"text-align: center;\"\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/0702\/9949\/files\/BTS_Social_Proof_Narrow_c69777d4-f7d7-4fd7-834d-b1f9ba172580.png?v=1506018491\" alt=\"\" style=\"margin: 0pxpx 0pxpx 0pxpx 0pxpx; float: none;\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"section\"\u003e\n\u003cdiv class=\"layoutArea\"\u003e\n\u003cdiv class=\"column\"\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"column\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e"}
Responsive image

About BTS Crane Parts

BTS is a global supplier of crane LMI replacement parts and systems for mobile cranes, truck cranes, and lattice cranes. We work with most major brands such as Grove, National, Manitex, Link Belt, and many others. Whether you are looking for a replacement console for an old PAT DS350G or a complete LMI replacement on a Link Belt HC238, our knowledgeable staff has the experience necessary for a successful upgrade. We are proud to be a veteran owned small business with our warehouse located in the sunny state of Florida. If you have any questions please feel free to reach out to us via phone at +1.303.433.8878 or email at info@btscrane.com.


LEARN MORE
social