GS110 Trimble LSI Wireless Mini Cable Reel

GS110 Trimble LSI Wireless Mini Cable Reel

Code: GS110
$ 2,367.00
In Stock
Category: Cable Reels
  • 100% ORIGINAL AND QUALITY

  • 24 MONTHS GUARANTEE

  • 1-4 DAYS DELIVERY

GS110 LSI WIRELESS MINI CABLE REEL - 32FT:

The GS110 Mini Cable reel is designed for two styles of boom: proportional hydraulic crane booms (when you pull on telescoping lever, boom sections telescope equally) and booms with a maximum boom length of 32 feet (10 meters).

With a small footprint, it is easy to install and reduces system costs. The single conductor stainless steel cable can terminate at the end of the first telescoping section on a proportional boom, eliminating the need to run the cable all the way to the boom tip and reducing cable breakage.

When the crane is telescoped, the LSI GS110 Mini Cable Reel only excites the length potentiometer to get a length reading. As LSI uses a wireless A2B, we can utilize a much stronger steel cable than you will see on a competitor’s reel. Our competitors must use the cable reel cable to move the A2B signal as well, decreasing the strength of the cable. Cable reel cable breakage is very minimal with an LSI cable reel.

The extension length of the cable is 32 feet or 10 meters. For proportional boom designs, the GS110 is ideal to eliminate the need to run the cable all the way to the boom tip, which helps to eliminate cable breakage when working in proximity to trees, etc.

A wireless transmitter box mounted on the front face of the cable reel transmits the boom length and boom angle simultaneously back to the LSI display. This eliminates the cable that typically runs between the cable reel and the display, and saves installation time. In the long run, the GS110 reduces support costs by eliminating another cable or connection that requires troubleshooting.  Users will enjoy the ability to quickly setup and adjust the boom angle from the LSI display, eliminating the need to manually adjust the boom angle physically on the cable reel.

The Mini Cable Reel frame is 9.13” wide X 7.25” tall, and its compact design will retrofit onto a diverse range of crane types. If you are looking for accuracy, the angle and length sensors are read 4 times per second, with this data being transmitted to the display. Angle sensor accuracy is .2 degrees.

The Mini Cable Reel can be left or right hand cab mounted. The angle sensor will automatically adjust its orientation for the side of the boom that it is installed on.

The transmitter box is powered as standard by one “D” cell lithium battery with a typical life span of 1-2 years. Users can also use a “D” cell alkaline battery if required.

GS110 LSI WIRELESS MINI CABLE REEL - 32FT:

The GS110 Mini Cable reel is designed for two styles of boom: proportional hydraulic crane booms (when you pull on telescoping lever, boom sections telescope equally) and booms with a maximum boom length of 32 feet (10 meters).

With a small footprint, it is easy to install and reduces system costs. The single conductor stainless steel cable can terminate at the end of the first telescoping section on a proportional boom, eliminating the need to run the cable all the way to the boom tip and reducing cable breakage.

When the crane is telescoped, the LSI GS110 Mini Cable Reel only excites the length potentiometer to get a length reading. As LSI uses a wireless A2B, we can utilize a much stronger steel cable than you will see on a competitor’s reel. Our competitors must use the cable reel cable to move the A2B signal as well, decreasing the strength of the cable. Cable reel cable breakage is very minimal with an LSI cable reel.

The extension length of the cable is 32 feet or 10 meters. For proportional boom designs, the GS110 is ideal to eliminate the need to run the cable all the way to the boom tip, which helps to eliminate cable breakage when working in proximity to trees, etc.

A wireless transmitter box mounted on the front face of the cable reel transmits the boom length and boom angle simultaneously back to the LSI display. This eliminates the cable that typically runs between the cable reel and the display, and saves installation time. In the long run, the GS110 reduces support costs by eliminating another cable or connection that requires troubleshooting.  Users will enjoy the ability to quickly setup and adjust the boom angle from the LSI display, eliminating the need to manually adjust the boom angle physically on the cable reel.

The Mini Cable Reel frame is 9.13” wide X 7.25” tall, and its compact design will retrofit onto a diverse range of crane types. If you are looking for accuracy, the angle and length sensors are read 4 times per second, with this data being transmitted to the display. Angle sensor accuracy is .2 degrees.

The Mini Cable Reel can be left or right hand cab mounted. The angle sensor will automatically adjust its orientation for the side of the boom that it is installed on.

The transmitter box is powered as standard by one “D” cell lithium battery with a typical life span of 1-2 years. Users can also use a “D” cell alkaline battery if required.

Have a Question?

The BTS Parts Team is always available to answer any questions you may have. Please feel free to leave a message and we will reply within 24 hours.

4737 North Ocean Drive
Suite 206
Fort Lauderdale FL 33308

(+1) 855.BODE.TEC
BTS... WE'RE TRUSTED BY 1000'S OF COMPANIES BIG AND SMALL