Retrofit Anti Two Block System - Rayco Wylie

Retrofit Anti Two Block System - Rayco Wylie

Code: N/A
Sale
$ 1,998.00 $ 1,798.00
In Stock
  • 100% ORIGINAL AND QUALITY

  • 24 MONTHS GUARANTEE

  • 1-4 DAYS DELIVERY

A complete crane retrofit option by Rayco Wylie for anti two block safety.  This kit includes all components needed for a complete self install of a stand alone A2B safety system. 

 

KIT INCLUDES

1x R147 Anti Two Block Display

retrofit anti two block display

1x 33B2007 Anti Two Block Switch

1x 22SWC0040 Weight, Chain, and Mounting Hardware

 

Basic Elements of a Rayco Wylie Crane Replacement Anti Two Block System

  1. Display or Receiver Unit - is mounted in the cab or by the operator controls and is designed to monitor the radio signal for the boom tip located anti two block switch. Generally this display is also able to generate an electrical signal output used to activate pre installed lockout function. The display/receiver comes standard for 12V or 24V negative body machines. For machines requiring non-standard electrical systems, adapting relays or different installation procedures might be needed as further detailed.
  2. Radio Anti Two Block Switch - to be installed at the tip of the boom and/or jib. This switch actually detects the two block condition via use of a weight and chain and relay switch and instantaneous transmits this information to the control mounted display.
  3. Weight & Chain - this is the part of the system that hangs down along the load line and holds the anti two block switching mechanism under pressure. If the hook block moves too close and lifts this weight the switching mechanism in the A2B switch is triggered.

Everything needed for a complete Rayco Wylie retrofit anti two block system is included. If you have any questions please feel free to call 303.433.8878

A complete crane retrofit option by Rayco Wylie for anti two block safety.  This kit includes all components needed for a complete self install of a stand alone A2B safety system. 

 

KIT INCLUDES

1x R147 Anti Two Block Display

retrofit anti two block display

1x 33B2007 Anti Two Block Switch

1x 22SWC0040 Weight, Chain, and Mounting Hardware

 

Basic Elements of a Rayco Wylie Crane Replacement Anti Two Block System

  1. Display or Receiver Unit - is mounted in the cab or by the operator controls and is designed to monitor the radio signal for the boom tip located anti two block switch. Generally this display is also able to generate an electrical signal output used to activate pre installed lockout function. The display/receiver comes standard for 12V or 24V negative body machines. For machines requiring non-standard electrical systems, adapting relays or different installation procedures might be needed as further detailed.
  2. Radio Anti Two Block Switch - to be installed at the tip of the boom and/or jib. This switch actually detects the two block condition via use of a weight and chain and relay switch and instantaneous transmits this information to the control mounted display.
  3. Weight & Chain - this is the part of the system that hangs down along the load line and holds the anti two block switching mechanism under pressure. If the hook block moves too close and lifts this weight the switching mechanism in the A2B switch is triggered.

Everything needed for a complete Rayco Wylie retrofit anti two block system is included. If you have any questions please feel free to call 303.433.8878

Have a Question?

The BTS Parts Team is always available to answer any questions you may have. Please feel free to leave a message and we will reply within 24 hours.

4737 North Ocean Drive
Suite 206
Fort Lauderdale FL 33308

(+1) 855.BODE.TEC
BTS... WE'RE TRUSTED BY 1000'S OF COMPANIES BIG AND SMALL