Trimble GC 018 LSI Wireless Load Cell

Trimble GC 018 LSI Wireless Load Cell

Code: GC 018
$ 2,798.00
In Stock
  • 100% ORIGINAL AND QUALITY

  • 24 MONTHS GUARANTEE

  • 1-4 DAYS DELIVERY

GC018 LSI WIRELESS 18K LOAD CELL FOR 3/4" WIRE ROPE

Trimble GC 018 Load Cell Features:

  • Potted electronics in a gel that eliminates moisture failure on the circuit board
  • Accuracy on a single part of line is .1% and averages 1% on multiple parts of line
  • Built from 17-4 stainless steel which provides a very strong strength yield and excellent corrosion resistance
  • Each load cell ships pre calibrated to ensure that your system setup time is minimized and eliminating the need for test weights
  • Rated from an operating temperature of -30F to +180F or -35C to +85C
  • Load cells are temperature compensated to ensure a consistent load value regardless of temperature or location

 

Trimble LSI  GC018 Load Cell
 
Wireless Load Cells from Trimble’s Lifting Solutions Division are ideal for installation inline on cranes and lifting equipment. They are critically important elements in the structural integrity of the safe lifting of the load.  Simply install the load cell, turn on the display and the system is ready to go to work. We ship each load cell standard with a “D’ cell lithium battery.  Each sensor is equipped with a voltage switcher allowing a “D” cell alkaline battery to be installed into the transmitter. This would only be in the event you cannot easily source a lithium battery once the 3-week low battery warning activates through the system display.
 

Trimble LSI GC 018 Load Cell Size Specifications

 

Trimble GC018 International Shipping Specifications

  • ECCN: EAR99
  • SCHEDULE B: 8423890000
  • HTSUS CODE: 8423901000
  • INTRASTAT: 8431498000
  • COUNTRY OF ORIGIN: USA
  • WEIGH: 5.3KG
  • SIZE: PLEASE SEE SIZE SCHEMATIC ABOVE


 



GC018 LSI WIRELESS 18K LOAD CELL FOR 3/4" WIRE ROPE

Trimble GC 018 Load Cell Features:

  • Potted electronics in a gel that eliminates moisture failure on the circuit board
  • Accuracy on a single part of line is .1% and averages 1% on multiple parts of line
  • Built from 17-4 stainless steel which provides a very strong strength yield and excellent corrosion resistance
  • Each load cell ships pre calibrated to ensure that your system setup time is minimized and eliminating the need for test weights
  • Rated from an operating temperature of -30F to +180F or -35C to +85C
  • Load cells are temperature compensated to ensure a consistent load value regardless of temperature or location

 

Trimble LSI  GC018 Load Cell   Wireless Load Cells from Trimble’s Lifting Solutions Division are ideal for installation inline on cranes and lifting equipment. They are critically important elements in the structural integrity of the safe lifting of the load.  Simply install the load cell, turn on the display and the system is ready to go to work. We ship each load cell standard with a “D’ cell lithium battery.  Each sensor is equipped with a voltage switcher allowing a “D” cell alkaline battery to be installed into the transmitter. This would only be in the event you cannot easily source a lithium battery once the 3-week low battery warning activates through the system display.  

Trimble LSI GC 018 Load Cell Size Specifications

 

Trimble GC018 International Shipping Specifications

  • ECCN: EAR99
  • SCHEDULE B: 8423890000
  • HTSUS CODE: 8423901000
  • INTRASTAT: 8431498000
  • COUNTRY OF ORIGIN: USA
  • WEIGH: 5.3KG
  • SIZE: PLEASE SEE SIZE SCHEMATIC ABOVE


 



Have a Question?

The BTS Parts Team is always available to answer any questions you may have. Please feel free to leave a message and we will reply within 24 hours.

4737 North Ocean Drive
Suite 206
Fort Lauderdale FL 33308

(+1) 303 433 8878
BTS... WE'RE TRUSTED BY 1000'S OF COMPANIES BIG AND SMALL
Trusted Brands